Abstract Data Event Boss ADE-33 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління Abstract Data Event Boss ADE-33. Abstract Data Event Boss ADE-33 16 сторінок. Rhythm and pattern creation and manipulation

Друкувати сторінку

11) Global Mode 5: Phase

MODE OVERVIEW

The Phase mode allows a user to shift the starting point or adjust the 'mark/space' ratio of an input

Event to a later starting point or to a different ratio. This is all done via CV and depending on the

selected Local Mode - the starting point shift or the mark/space ratio change can be based on a

'musical' sub division, a percentage shift or a time-based delay in mS.

FIRST PATCH

• This mode works best with regular Event inputs like clocks - but will also work with patterns and

Event inputs with irregular timing.

• Start with some sort of mid-tempo clock or square-wave LFO and a manually adjustable CV source.

• For each selected Local Mode – as the CV value changes – the Output phase should also change.

INPUT TYPES

IN: GATE A1 & A2

IN: GATE B/CV

CV OPTIONS

Local

Global

LOCAL MODE 1: Quantised Shift

Operation

LOCAL MODE 2: Percentage Shift

Operation

LOCAL MODE 3: Short Shift

Operation

LOCAL MODE 4: Long Shift

Operation

LOCAL MODE 5: Quantised Mark/Space

Operation

LOCAL MODE 6: Percentage Mark/Space

Operation

• Any Event type e.g. clock, gate, trigger, square-wave or PWM-type LFO.

• Any 0-5V CV type e.g. LFO, envelope generator or variable CV source.

• 0-5V CV at IN: GATE B/CV sets each mode's phase-offset or delay.

• Event at IN: MODE SELECT/RESET sets each mode's phase/cycle length.

• Mark/Time calculations are still taken from IN: GATE A1 & A2.

• 0-5V CV sets the phase shift <n> to a value of:

0 || 1/16 || 1/8 || 1/4 || 1/3 || 1/2 || 3/4 || 1.

• Phase-shifts an input Event by a sub-division of it's own tempo.

• 0-5V CV sets the phase shift value from 0-100%.

• Phase-shifts an input Event by a percentage of it's own tempo.

• 0-5V CV sets the phase shift value from 0-1600mS.

• Phase-shifts an input Event by a time in mS.

• 0-5V CV sets the phase shift value from 0-4800mS.

• Phase-shifts an input Event by a time in mS.

• 0-5V CV sets the phase shift <n> to a value of:

Pulse || 12.5/87.5 || 25/75 || 37.5/62.5 || 50/50 || 62.5/37.5 || 75/25 || 87.5/12.5.

• Adjusts the Mark/Space ratio of an input Event to become a sub-division

ratio of it's own tempo.

• 0-5V CV sets the Mark segment of the Mark/Space ratio from 0-100%.

• Adjusts the Mark/Space ratio of an input Event to become a percentage

ratio of it's own tempo.

Page 11 of 13

Version 1.0.1