Abstract Data Event Boss ADE-33 Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління Abstract Data Event Boss ADE-33. Abstract Data Event Boss ADE-33 16 сторінок. Rhythm and pattern creation and manipulation

Друкувати сторінку
12) Global Mode 6: Gates
MODE OVERVIEW
The Gates mode allows a user to take Event signals like gates and triggers and extend their length
or join multiple Events together to form different length gate Events from
FIRST PATCH
• This mode is designed to work with most Event and CV types.
• Start with some sort of mid-tempo clock or square-wave LFO and a slow, evolving CV source.
• For each selected Local Mode – as the CV value changes – the Output pattern should also change.
INPUT TYPES
IN: GATE A1 & A2
IN: GATE B/CV
CV OPTIONS
Local
Global
LOCAL MODE 1: <n> High
CV
Operation
LOCAL MODE 2: <n> High/Low
CV
Operation
LOCAL MODE 3: Logic Pass
CV
Operation
LOCAL MODE 4: Logic Hold
CV
Operation
LOCAL MODE 5: <n> High/High/Low
CV
Operation
LOCAL MODE 6: Logic Pass/Hold
CV
Operation
© 2018 Abstract Data Ltd.
• Any Event type e.g. clock, gate, trigger, square-wave or PWM-type LFO.
• Any 0-5V CV type e.g. LFO, envelope generator or variable CV source.
• 0-5V CV at IN: GATE B/CV sets each mode's <n> value or Logic threshold.
• Event at IN: MODE SELECT/RESET resets the mode's <n> count.
• 0-5V CV sets a variable value of <n> to 1/2/3/4/5/6/7/8.
• Output stays High for <n> of 8 Events.
• 0-5V CV sets a variable value of <n> to 1/2/3/4/5/6/7/8.
• Output stays High for <n> of 8 Events then Low for <n> of 8 Events.
• 0-5V CV sets the Logic threshold above or below +2.5V.
• Reads CV at each new input Event.
• Output goes High if input is High AND CV >2.5V.
• Output goes Low if input is Low AND/OR CV <2.5V.
• 0-5V CV sets the Logic threshold above or below +2.5V.
• Reads CV at each new input Event.
• Output goes High if CV >2.5V.
• Output goes Low if CV >2.5V.
• 0-5V CV sets a variable value of <n> to 1/2/3/4/5/6/7/8.
• Toggles between Local Mode 1 and Local Mode 2.
• 0-5V CV sets a variable value of <n> to 1/2/3/4/5/6/7/8.
• Toggles between Local Mode 3 and Local Mode 4.
Page 12 of 13
Version 1.0.1