Anyload EC200 Manual de instruções - Página 7
Procurar online ou descarregar pdf Manual de instruções para Balanças Anyload EC200. Anyload EC200 16 páginas.
Também para Anyload EC200: Manual do utilizador (8 páginas)
Imprimir página
The machine is delivered in an environmentally-friendly carton, specifically developed for this
precision instrument, which provides optimum protection for the balance during transportation.
We suggest that you retain the original packaging in order to avoid transportation damage if re-shipping
or transporting the balance and to allow the unit to be stored in the best conditions if it is out of
operation for an extended period.
In order to avoid damage, attention must be given to the following points when unpacking the balance:
Unpack the weighing machine carefully. It is a precision instrument.
When outside temperatures are very low, the balance should first be stored for some hours in the
unopened transport package in a dry room at normal temperature, so that no condensation settles on
the unit when unpacking.
Check the weighing machine immediately after unpacking for externally visible damage. If you should
find transport damage, please inform your service representative immediately.
If the unit is not to be used immediately after purchase but only at a later time, it should be stored in a dry
place where fluctuations in temperature are as small as possible (see Chapter 7 .Transport, storage.).
Read through these operating instructions, even if you already have prior experience with weighing
equipment, before you work with the unit and pay attention to the Safety recommendations (see
Chapter 1 .Safety).
3.2 Scope of delivery
Inspect delivery for completeness immediately on unpacking all components.
Checklist for complete delivery
Weighing unit body
Weighing pan(s)
Power adapter
Operating manual
3.3 Assembling your weighing machine
The weighing machine is delivered in partly dismantled condition. Assemble the individual components in
the following sequence:
Place the unit holder in position and add the weighing pan
Insert the power adapter cable plug into the socket at the rear of the balance.
3.4 Choice of a suitable location
Page 7 of 16
Component delivered present yes / no
AL-manual-EC200-En-V2