- ページ 7

体重計 Anyload EC200のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Anyload EC200 16 ページ。
Anyload EC200 にも：ユーザーマニュアル (8 ページ)

The machine is delivered in an environmentally-friendly carton, specifically developed for this

precision instrument, which provides optimum protection for the balance during transportation.

We suggest that you retain the original packaging in order to avoid transportation damage if re-shipping

or transporting the balance and to allow the unit to be stored in the best conditions if it is out of

operation for an extended period.

In order to avoid damage, attention must be given to the following points when unpacking the balance:

Unpack the weighing machine carefully. It is a precision instrument.

When outside temperatures are very low, the balance should first be stored for some hours in the

unopened transport package in a dry room at normal temperature, so that no condensation settles on

the unit when unpacking.

Check the weighing machine immediately after unpacking for externally visible damage. If you should

find transport damage, please inform your service representative immediately.

If the unit is not to be used immediately after purchase but only at a later time, it should be stored in a dry

place where fluctuations in temperature are as small as possible (see Chapter 7 .Transport, storage.).

Read through these operating instructions, even if you already have prior experience with weighing

equipment, before you work with the unit and pay attention to the Safety recommendations (see

Chapter 1 .Safety).

3.2 Scope of delivery

Inspect delivery for completeness immediately on unpacking all components.

Checklist for complete delivery

Weighing unit body

Weighing pan(s)

Power adapter

Operating manual

The weighing machine is delivered in partly dismantled condition. Assemble the individual components in

the following sequence:

 Place the unit holder in position and add the weighing pan



 Insert the power adapter cable plug into the socket at the rear of the balance.



Page 7 of 16

Component delivered present yes / no

AL-manual-EC200-En-V2