DUCTFORMER TDFC Manual de operações e procedimentos - Página 4
Procurar online ou descarregar pdf Manual de operações e procedimentos para Equipamento industrial DUCTFORMER TDFC. DUCTFORMER TDFC 12 páginas. Power brake
Imprimir página1. General Information
The TDFC Power Brake is designed to operate in either Automatic or Manual Mode.
The Manual Mode is operated from a control box mounted on the front of the machine.
A foot operated switch operates the machine in Automatic Mode. A programmable logic
controller is mounted inside the electrical enclosure to control the machine operation
while in automatic mode. In either mode the machine is exclusively a one (1) man
operation. Unintended use, operator oversight and failure to operate in accordance with
these instructions can result in severe injuries.
2. System Operation
The Power Brake performs two operations. First the press bar with upper die is driven
down with pneumatic cylinders to clamp the part in place. Next the folding assembly
swings up to brake the part. The operation can be performed three times to produce a
full wrapper.
3. Unloading and Installation
3.1. Receiving the Machine
Visibly check machine for possible shipping damage.
If damage is evident, insist on a notation on the freight bill and photo
document the damage immediately along with a hand written description
of apparent damage.
If repairs are necessary, contact Ductformer by phone at 314-631-1416
you may be requested to E-Mail or Fax your damage documentation to
Ductformer.
Fax – 314-631-3003
E-mail – [email protected]
Do Not place damaged equipment under power until proper repairs have
been made by a qualified service technician.
OPERATING and PROCEDURES MANUAL
Page 4 of 12
TDFC POWER BRAKE