AnyTone ARES II Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Rádio AnyTone ARES II. AnyTone ARES II 16 páginas.
Também para AnyTone ARES II: Manual de instruções (16 páginas)

AnyTone ARES II Manual de instruções
MICROPHONE CONNECTION
1. Plug microphone connector into the microphone jack.
2. Tighten the retaining ring on the microphone connector by hand.
ANTENNA INSTALLATION
Before using this radio, please install an efficient and resonant antenna. Using
an antenna that is correctly installed and tuned will enable excellent
communication performance.
This radio requires an antenna impedance of 50 ohms, unbalanced.
1. Screw the antenna connector into the antenna jack.
2. If required, grounding of the antenna system will ensure best performance.
WARNING:
▲ NEVER transmit without a connected resonant antenna, or a suitable 50
ohm load being connected. Damage to the radio may result.
▲ To reduce the risk of electric shock, or radio damage, base station
installations should include lightning protection devices.
▲ Ask your Anytone dealer for available antenna options.
3. A mobile antenna can be mounted in various locations, for example:
POWER CONNECTION
This radio requires a 13.8V (12V) DC power supply. Never connect the radio directly
to a 24V DC battery system, as can be found in some vehicles.
Please refer to the radio Specifications to ensure your 13.8V DC power supply can
provide enough current (amps), otherwise poor performance may occur.
1
23
4
TX
1
3
5
7
9
3