- ページ 7

ラジオ AnyTone ARES IIのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AnyTone ARES II 16 ページ。
AnyTone ARES II にも：取扱説明書 (16 ページ)

MICROPHONE CONNECTION

1. Plug microphone connector into the microphone jack.

2. Tighten the retaining ring on the microphone connector by hand.

ANTENNA INSTALLATION

Before using this radio, please install an efficient and resonant antenna. Using

an antenna that is correctly installed and tuned will enable excellent

communication performance.

This radio requires an antenna impedance of 50 ohms, unbalanced.

1. Screw the antenna connector into the antenna jack.

2. If required, grounding of the antenna system will ensure best performance.

WARNING:

▲ NEVER transmit without a connected resonant antenna, or a suitable 50

ohm load being connected. Damage to the radio may result.

▲ To reduce the risk of electric shock, or radio damage, base station

installations should include lightning protection devices.

▲ Ask your Anytone dealer for available antenna options.

3. A mobile antenna can be mounted in various locations, for example:

POWER CONNECTION

This radio requires a 13.8V (12V) DC power supply. Never connect the radio directly

to a 24V DC battery system, as can be found in some vehicles.

Please refer to the radio Specifications to ensure your 13.8V DC power supply can

provide enough current (amps), otherwise poor performance may occur.