Duevi EZY-LAN HW 4A Manual do instalador - Página 11
Procurar online ou descarregar pdf Manual do instalador para Sistema de segurança Duevi EZY-LAN HW 4A. Duevi EZY-LAN HW 4A 13 páginas. Wireless alarm panel with ethernet + wi-fi + gsm + lte
Imprimir página•
Client Account: client identification code -
provided by the Monitoring Station
•
Server IP address: IP address of the receiver
- provided by the Monitoring Station
•
Port: communication port of the receiver -
provided by the Monitoring Station
•
CONNECTION TEST: send the Life Test code
to test the parameters
•
Codes: this section indicates all the events
(with relative standard codes) that the control
panel can send to the monitoring station.
In the Contact-ID standard each event is
identified
with
It is possible to modify the value associated
with each event (if the Monitoring Station uses
different
The sending of each event can be enabled /
disabled with the ON / OFF switch.
12.11 Other commands (SETUP)
Riceive from panel
Upload the configuration present in the control
panel to the software interface. When you enter
SETUP it is loaded automatically.
Send to panel
Send to the control panel the configuration
currently displayed in the software interface.
Save settings on disk (Windows App only)
Save to file the configuration currently displayed
in the software interface.
Load settings from disk (Windows App only)
Load a configuration previously saved on file into
the software interface.
a
numerical
code.
codes).
13 Homepage (TEST)
By pressing the ENTER TEST button, the control
panel switches to test mode and the RGB LEDs
of the control unit flash blue.
The homepage continues to display panel
information.
13.1 TEST Menu
The test menu, accessible by pressing the icon
(double right arrow), contains the following items:
•
Test Zones
•
Test Sirens
•
Test Keyfobs
•
Test GSM
•
Test Immages
•
Test Light
•
Test Roller shutter
•
Test Gate
•
Test Irrigation
•
Test Relay
13.2 Test Zones (TEST)
On
this
page
you
transmissions of each device (apart from the
keyfobs that have a specific page).
A line will be added for each transmission
received indicating the device name, date / time,
the status of the affected zone (eg. internal
contact alarm, external contact rest, tamper
alarm, etc) and the RSSI radio level received from
the control panel.
Each new transmission will be placed at the top of
the list.
13.3 Test Sirens (TEST)
The page contains the list of radio sirens present
in the system, which can be tested individually.
Pressing the icon
available tests and the commands for starting and
stopping the test.
•
Visual test / commands only the flashing of the
siren LEDs
•
Visual + beep test / commands flashing and
low power beeps
•
Alarm test / commands High power alarm
sound
Try one siren at a time to avoid overlapping
commands.
13.4 Test Keyfobs (TEST)
On
this
page
you
transmissions of the keyfobs present in the
system.
A line will be added for each transmission
received indicating the associated user name, the
can
check
the
(info) expands the view of the
can
check
the
radio
radio