Cascade 100R Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Empilhadores Cascade 100R. Cascade 100R 18 páginas. Integral mount sideshifter, sideshifting fork positioner

Imprimir página

INSTALLATION

Truck Requirements

Truck Relief Setting
152 bar Recommended
241 bar Maximum
Truck Flow Volume
80R/100R-IFS
80R/100R-ISS
➀ Cascade R-Series Integral Attachments are compatible with
SAE 10W petroleum base hydraulic fluid meeting Mil. Spec.
MIL-0-5606 or MIL-0-2104B. Use of synthetic or aqueous base
hydraulic fluid is not recommended. If fire resistant hydraulic
fluid is required, special seals must be used. Contact Cascade.
➁ Flow less than recommended will result in slow fork positioning
and sideshift speed.
➂ Flow greater than maximum can result in excessive heating,
reduced system performance and short hydraulic system life.
Auxiliary Valve Functions
Check for compliance with ANSI (ISO) standards:

Hydraulic Supply

IN0019.eps
6
➀
Min.
➁
Recommended Max.
4 L/min.
7.5 L/min.
➂
12 L/min.
IN0018.eps
Tilt Forward
Hoist Down
GA0082.eps
Hoist Up
Tilt Back
Fork Positioning and Sideshift function: No. 8 hose/
No. 8 fittings with 10 mm minimum ID.
Refer to Cascade Hose & Cable Reel Selection Guide,
B
Part No. 212199 to select the correct hose reel for the
mast and truck.
C
Sideshifting
A
Mast Single Internal Reeving
OR
A
B
Hose Reel
Fork Positioning & Sideshifting
A
Mast Double Internal Reeving
OR
C
Mast Single Internal Reeving and Hose Reel
Sideshift
Left
Open Forks (if equipped)
Close Forks (if equipped)
Sideshift
Right
6914838 EN