Addictive Desert Designs Bomber Manual de instruções de instalação

Procurar online ou descarregar pdf Manual de instruções de instalação para Acessórios para automóveis Addictive Desert Designs Bomber. Addictive Desert Designs Bomber 10 páginas. Front bumper for 2017-current ford superduty

Imprimir página
ADDICTIVE DESERT DESIGNS® ®
ADDICTIVE DESERT DESIGNS
Preparation:
• Disconnect the negative battery terminal. Park the vehicle on level ground and set the emergency brake.
• We recommend reading through the installation instructions in whole before performing the work.
• When button head bolts are being used, install the supplied washer on the nut side. Then, hold the bolt station-
ary and only turn the nut to tighten. Do not turn the bolt to tighten hardware assembly, unless otherwise noted.
• Estimated Installation Time: 2 Hours for OEM Removal/Bumper Installation
**This installation requires 2 people for best results**
**Labor Rates are based on a vehicle with no pre-existing damage. Wiring labor is based on a standard wiring procedure
with light switches installed in an easily accessible location. Custom light triggering or switch mounting location will
result in a greater labor charge.**
You will need the following tools:
- Ratchet
- 9/16" Socket
- 3/4" Wrench
- 5/16" Allen
Included in Kit:
4
- Hex Head Bolts
4
- U-Nuts
(3/8"-16)
8
- Flat Washers
4
- Hex Head Bolts
4
- Nylon Lock Nuts
4
- Black Washers
2
- Black Button Head Bolts
2
- Black Nylon Lock Nuts
2
- Flat Washers
2
- Bumper Mounting Brackets
4
- Flat Washers
2
- Light Mount Tabs
Addictive Desert Designs® | Page 1
1 Additional Hour to Wire Center Lights
1 Additional Hour to Wire Side Lights
- 15mm Socket
- 13/16" Socket
- 7/8" Wrench
(3/8-16 x 1")
(9/16")
(1/2-13 x 1 1/2")
(1/2"-13)
(1/2")
(3/8-16 x 1")
(3/8"-16)
(3/8")
(3/8")
(20 Model Only)
(for 20" LED Bar)
(20 Model Only)
2017-Current Ford SuperDuty
Bomber™ Front Bumper Installation Instructions
- 18mm Socket
- 9/16" Wrench
- 7/32" Allen Wrench/Socket
6
- Fender Washers
(3/8")
4
- Hex Head Bolts
(9/16-12 x 2")
4
- Nylon Lock Nuts
8
- Flat Washers
(1/2")
4
- Black Button Head Bolts
4
- Black Nylon Lock Nuts
2
- Black Washers
(3/8")
2
- Hex Head Bolts
(3/8-16 x 1 1/4")
2
- Nylon Lock Nuts
4
- Carriage Bolts
(3/8-16 x 1")
4
- Nylon Lock Nuts
(9/16"-12)
(1/2-13 x 1 1/2")
(1/2"-13)
(3/8"-16)
(20 Model Only)
(3/8"-16)
(20 Model Only)