Addictive Desert Designs Bomber Інструкція з монтажу Посібник з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні аксесуари Addictive Desert Designs Bomber. Addictive Desert Designs Bomber 10 сторінок. Front bumper for 2017-current ford superduty

Друкувати сторінку
ADDICTIVE DESERT DESIGNS® ®
ADDICTIVE DESERT DESIGNS
Preparation:
• Disconnect the negative battery terminal. Park the vehicle on level ground and set the emergency brake.
• We recommend reading through the installation instructions in whole before performing the work.
• When button head bolts are being used, install the supplied washer on the nut side. Then, hold the bolt station-
ary and only turn the nut to tighten. Do not turn the bolt to tighten hardware assembly, unless otherwise noted.
• Estimated Installation Time: 2 Hours for OEM Removal/Bumper Installation
**This installation requires 2 people for best results**
**Labor Rates are based on a vehicle with no pre-existing damage. Wiring labor is based on a standard wiring procedure
with light switches installed in an easily accessible location. Custom light triggering or switch mounting location will
result in a greater labor charge.**
You will need the following tools:
- Ratchet
- 9/16" Socket
- 3/4" Wrench
- 5/16" Allen
Included in Kit:
4
- Hex Head Bolts
4
- U-Nuts
(3/8"-16)
8
- Flat Washers
4
- Hex Head Bolts
4
- Nylon Lock Nuts
4
- Black Washers
2
- Black Button Head Bolts
2
- Black Nylon Lock Nuts
2
- Flat Washers
2
- Bumper Mounting Brackets
4
- Flat Washers
2
- Light Mount Tabs
Addictive Desert Designs® | Page 1
1 Additional Hour to Wire Center Lights
1 Additional Hour to Wire Side Lights
- 15mm Socket
- 13/16" Socket
- 7/8" Wrench
(3/8-16 x 1")
(9/16")
(1/2-13 x 1 1/2")
(1/2"-13)
(1/2")
(3/8-16 x 1")
(3/8"-16)
(3/8")
(3/8")
(20 Model Only)
(for 20" LED Bar)
(20 Model Only)
2017-Current Ford SuperDuty
Bomber™ Front Bumper Installation Instructions
- 18mm Socket
- 9/16" Wrench
- 7/32" Allen Wrench/Socket
6
- Fender Washers
(3/8")
4
- Hex Head Bolts
(9/16-12 x 2")
4
- Nylon Lock Nuts
8
- Flat Washers
(1/2")
4
- Black Button Head Bolts
4
- Black Nylon Lock Nuts
2
- Black Washers
(3/8")
2
- Hex Head Bolts
(3/8-16 x 1 1/4")
2
- Nylon Lock Nuts
4
- Carriage Bolts
(3/8-16 x 1")
4
- Nylon Lock Nuts
(9/16"-12)
(1/2-13 x 1 1/2")
(1/2"-13)
(3/8"-16)
(20 Model Only)
(3/8"-16)
(20 Model Only)