3rd Power CLEAN SINK MKII Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Amplificador de instrumentos musicais 3rd Power CLEAN SINK MKII. 3rd Power CLEAN SINK MKII 12 páginas.

Imprimir página

Tube Layout:

CAN

CAPACITOR

POWER

TRANSFORMER

Tube Layout and Requirements:

V1: JJ ECC83S (Preamp, American and AC Voices)

V2: JJ ECC83S (Mix-down and Post EQ)

V3: Sovtek 12AX7LPS (Reverb)

V4: Sovtek 12AX7LPS (Phase Inverter)

V5 - V6: JJ 6V6S (Power Amp)

Bias Adjustment

Your CLEAN SINK MKII comes from the factory biased for JJ 6V6S tubes with an idle current draw of

~25ma. Bias adjustments are not intended to be user-serviceable. Attempting to adjust the bias your-

self will expose you to very dangerous high-voltage electricity that can kill you. Special test equip-

ment and knowledge of amp circuits and tubes are required to perform this function. DO NOT AT-

TEMPT TO DO THIS YOURSELF.

Tube Replacement

WE RECOMMEND TAKING YOUR AMPLIFIER TO A QUALIFIED TECHNICIAN FOR SERVICING YOUR

TUBES. Make certain the ampliﬁer is turned off and has been allowed ample time to cool down. Be

very careful when you remove the tubes as they might still be very hot! Do not touch tube sockets

with ﬁngers! Even after turning your amp off and unplugging it from the power outlet there could be

enough voltage stored in the capacitors to give you a lethal electrical shock.

WARNING:

• Do not remove the back panel.

• Do not attempt to check or replace tubes yourself. Refer to an authorized service center.

• Never touch the tubes while the ampliﬁer is turned on or has recently been turned ON. You can

severely burn your ﬁngers and hands.