Duke 59 Series Manual do Proprietário - Página 6
Procurar online ou descarregar pdf Manual do Proprietário para Forno Duke 59 Series. Duke 59 Series 20 páginas. Ovens with “zp” control panel
Também para Duke 59 Series: Manual de instalação e operação (20 páginas)
Imprimir página
Left Function
Key
Select Button
Time programming Button
O
PERATION OF CONTROL
The ZP Convection Oven Controller is designed to
simplify your cooking process and allow your
foodservice operators to spend more time with the
customers and other important responsibilities. Quality
control of your food product is assured through the
various features, notification displays and alarms
designed into the controller.
There are two methods of baking with the ZP control:
Shelf Timer Baking
Event Baking
SHELF TIMER BAKING
The ZP Convection Oven Controller provide five
individual shelf timers. Shelf timer baking allows the
user to add product to the oven as needed and set
individual timers for each new item.
Display
Right Function
Key
Up/Down Arrows
Temperature/Fan Speed Programming Button
NOTE: You may add simultaneous or subsequent trays
of the same or different products to the oven if they
bake at the same temperature and fan setting. Products
which are set up for event baking will not have shelf
timer baking available.
EVENT BAKING
The ZP Convection Oven Controller provides one-
touch control of the entire baking process by allowing
you to divide each product bake cycle into six distinct
stages or "events". Each stage can be programmed for
time, temperature, fan speed, controller-compensated
time, or straight time countdown mode.
Using event baking with muffins, for example, yields
excellent results. Here is an example of a typical
controller bake cycle for an oven load of muffins, half
corn and half blueberry:
Event 1: Begin at 400
•
F for 5 minutes with fan on.
Event 2: After 5 minutes, when the muffin batter has
risen to the top of the cups, we'll program the
fan off for the next 10 minutes to allow the
muffins to rise high and evenly.
Event 3: We'll now turn the fan back on and set oven
temperature to 375
permitting an even bake through the center of
the product.
Event 4: During the last 5 minutes of the bake cycle, we
want to set the muffin peaks and finish them
off to a golden color, so we'll increase the
temperature to 400
NOTE:
When event baking is to be used, the
countdown time displayed is the sum of all the stages.
CONTROLLER RESET
In rare situations such as a lightening strike near
the facility, the controller may lose its program or
become "locked". To reset the controller simply
turn the power switch off, wait several seconds and
turn the unit back on.
6
•
F for the next 5 minutes,
•
F.