Duke 59 Series Kullanıcı El Kitabı - Sayfa 6

Fırın Duke 59 Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Duke 59 Series 20 sayfaları. Ovens with “zp” control panel
Ayrıca Duke 59 Series için: Kurulum ve Kullanım Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Left Function

Key

Select Button

Time programming Button

PERATION OF CONTROL

The ZP Convection Oven Controller is designed to

simplify your cooking process and allow your

foodservice operators to spend more time with the

customers and other important responsibilities. Quality

control of your food product is assured through the

various features, notification displays and alarms

designed into the controller.

There are two methods of baking with the ZP control:

Shelf Timer Baking

Event Baking

SHELF TIMER BAKING

The ZP Convection Oven Controller provide five

individual shelf timers. Shelf timer baking allows the

user to add product to the oven as needed and set

individual timers for each new item.

Display

Right Function

Key

Up/Down Arrows

Temperature/Fan Speed Programming Button

NOTE: You may add simultaneous or subsequent trays

of the same or different products to the oven if they

bake at the same temperature and fan setting. Products

which are set up for event baking will not have shelf

timer baking available.

EVENT BAKING

The ZP Convection Oven Controller provides one-

touch control of the entire baking process by allowing

you to divide each product bake cycle into six distinct

stages or "events". Each stage can be programmed for

time, temperature, fan speed, controller-compensated

time, or straight time countdown mode.

Using event baking with muffins, for example, yields

excellent results. Here is an example of a typical

controller bake cycle for an oven load of muffins, half

corn and half blueberry:

Event 1: Begin at 400

•

F for 5 minutes with fan on.

Event 2: After 5 minutes, when the muffin batter has

risen to the top of the cups, we'll program the

fan off for the next 10 minutes to allow the

muffins to rise high and evenly.

Event 3: We'll now turn the fan back on and set oven

temperature to 375

permitting an even bake through the center of

the product.

Event 4: During the last 5 minutes of the bake cycle, we

want to set the muffin peaks and finish them

off to a golden color, so we'll increase the

temperature to 400

NOTE:

When event baking is to be used, the

countdown time displayed is the sum of all the stages.

CONTROLLER RESET

In rare situations such as a lightening strike near

the facility, the controller may lose its program or

become "locked". To reset the controller simply

turn the power switch off, wait several seconds and

turn the unit back on.

•

F for the next 5 minutes,

•