Dulux PaintPod Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Pulverizador de tinta Dulux PaintPod. Dulux PaintPod 18 páginas. Roller system

Imprimir página
Dulux PaintPod Manual do utilizador
CAriNg fOr YOur PAINTPOD
drAiNiNg ANd CLeANiNg
g
Fill white chamber to level
indicated with 5 litres of warm
water and return it to the
PaintPod.
Remove dip tube from dip tube
rests and close lid.
Lift dip tube cover and insert dip
tube into PaintPod.
Twist dip tube clockwise to lock
and 'click' into position.
Close the dip tube cover.
j
Using handles, lift blue chamber
out of the PaintPod and take to
the sink to empty the waste water.
DO NOT pour into rain water
drains, natural water courses or
onto land.
h
Press 'clean' button to activate
cleaning cycle – this takes
about 10 minutes and stops
automatically when completed.
IMPORTANT:
If 'clean' warning
light illuminates, check roller
head and handle are correctly
placed in the docking station.
Remove roller head from docking
station. Remove roller sleeve from
roller head. Squeeze out excess
water and leave out to dry.
IMPORTANT:
The roller fibres will
permanently adsorb some dye
from the colour of the paint being
used. This is more noticeable
with stronger colours.
IMPORTANT:
In some instances
(e.g. if roller has been overloaded)
it may be necessary to give the
roller head components a more
thorough clean as described on
page 12. This will ensure that you
get maximum performance from
your PaintPod.
11
i
1
Lift blue chamber lid and remove
roller handle from roller head
by pressing roller head release
button.
Hold delivery tube above
PaintPod and press 'drain' button
again to remove any excess water.
IMPORTANT:
If roller contains
excessive paint, it may be
necessary to repeat the cleaning
cycle, using clean warm water.
To prevent spilling dirty water on
floor – DO NOT lift roller head from
docking station.
k
Roller
head
connector
Any paint left on the roller head
connector should be removed
with a rag.
If necessary remove and clean
the roller head connector as
described on page 13.
2