Danfoss VLT 2800 Series Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Accionamentos DC Danfoss VLT 2800 Series. Danfoss VLT 2800 Series 4 páginas.
Também para Danfoss VLT 2800 Series: Configuração rápida (2 páginas), Instalação (2 páginas), Configuração rápida (2 páginas)

Imprimir página

VLT

2800 Series

1. Select parameter 620 Operation Mode

2. Select data value [3] (Initialize)

3. Cut mains

The frequency converter has now been programmed

for factory setting. The following parameters are not

reset during manual initialisation:

- Par. 600 Operating hours

- Par. 601 Hours run

- Par. 602 kWh counter

- Par. 603 Number of power-ups

- Par. 604 Number of overtemperatures

- Par. 605 Number of overvoltages

■ Future Ordering

For future ordering it is necessary to state the order

number for the power unit as well as the control unit.

The power unit order number is placed on top of the

power unit, whereas the control unit order number is

placed on the back of the front cover

MI.28.A1.02 - VLT is a registered Danfoss trade mark