Aolait ALB6C Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de iluminação Aolait ALB6C. Aolait ALB6C 7 páginas. Wireless & ir up-light battery led par 6 x 18w (6in1 led)
Imprimir página1. Caution!
Do not attempt any repairs yourself. Doing so will void your manufactures warranty. In the
unlike event your unit may require service please contact us
2. Warning
To prevent or reduce the risk of the electrical shock or fire, do not expose this unit to any
moisture. Please read this manual carefully to familiarize yourself with basic operations of this
unit
3. Safety precautions
1. Do not expose this unit to , wet moisture, explosive
2. Before plugging the power be sure local power outlets matches with the required voltage
of the unit
3. Do not remove the cover under the circumstance in case you are not qualified to do so
4. Never connect the power when cover is removed
5. Never use this unit if it becomes damage
6. Never connect this unit to any if dimmer and / or power pack
7. If the unit will not be used for the long time , disconnect it from the power supply
8. Always mount this unit safe and stable and make sure the area will have proper ventilation.
Take care this unit will not mounted in are close to heat sources such as lighting fixtures,
amplifiers heat registers, stoves and radiators
9. Always contact us in case you have any doubts
4. General Instruction
ALB6C is a battery powered and wireless Dmx intelligent RGBAW UV color light. User can
control the light by using wireless Dmx transmitter or run at master and salve mode. Fixture it
has 12 static color, user can set lights at static color mode without using the Dmx controller.
5. Set Up
ALB6C in had used switching voltage power supply, User can use directly plug in any voltage
from 90V-240V when charging or operating at charging mode. Battery it can be fully charged
after 3-4 hours of charging, user can also operate the light while charging the battery. When
User ready to operate the light or use in event or any places first user need to turn on the power
switch. After on the Power switch user can start to set up light at wireless Dmx mode, wire
Dmx mode, master and salve. Sound active mode, static color mode, auto mode, strobe, fade
or test mode. There is 2 thing must be remember by user
1. Operate light at Dmx Mode: Always set the fixture from menu at "Sl1 or Sl2" mode,
process; Press menu then press up/down key until appear "Slnd" press enter at "Slnd" choose
Sl1 or Sl2 and press Enter, after some second light will be stay at "stby" means at standby
mode to catch dmx signal, no matter its cable or wireless Dmx.
Note: when operate light at wireless Mode, make sure that signal switch is on, fixture its not
too far from the wireless DMX
Transmitter, after on the signal switch wireless indicator bulb should show red color, once
2