Aolait ALB6C Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de iluminação Aolait ALB6C. Aolait ALB6C 7 páginas. Wireless & ir up-light battery led par 6 x 18w (6in1 led)

Imprimir página

fixture start to receive the signal this indicator bulb it will show blipping green color led, some

time if wireless signal indicator bulb show other color then continually press black button

below the led indicator bulb until it shows red color. Some manufactures wireless transmitter it

has different led bulb color signal, make sure with supplier which is color indicate the

transmitting signal and set same color at fixture's wireless signal indictor by pressing the black

button(id code selector) of fixture, once both color are same wireless signal led it will start to

blip green color, remember green color means its receiving signal from master unit or dmx

controller.

1. Operate light without using Dmx controller or built in color or effects or strobe or fade or

static color, sound active or master and slave: Always set the fixture from Menu at "Nast"

mode, then user can go inside the "Shnd" and choose any built in effects such as sound active,

static color, strobe, fade, Process;

Press menu then press up/down key until appear "Slnd" press enter at "Slnd" choose "nast"

and press Enter then Press Up button choose "Shnd" then press enter, now user can choose any

type of effect mode, soun for sound active mode, colo for static color mode, StCo for strobe

and Fade for built in effect types.

6. Examples

1. Set light at sound active and stay at sound active mode

Press Menu then press up/down button until appear slnd, press enter at slnd, find nast by

pressing up/down button then press enter, Press up button Shnd will appear at display then

press enter now you can see soun at display then press enter, after some second of pressing

enter light it will start to work at sound active mode.

If you wish connect other light also at same mode without setting or salve mode, then Press

Menu, find slnd and press enter then choose sl1 or sl2 then press enter. Follow same process at

all light you want to work at same mode, after some seconds light it will start to work same

function as first light

You can connect the lights by Dmx cable or also can connect wirelessly. When connect

wireless make sure signal switch it's on. This is function of master and salve .(App #. 1)

2. Set and stay at static color: Press Menu- Up/down button Slnd-enter- press up button- Shnd-

Press enter- up button- colo- press enter- choose any color number from 1-12 and press enter

after some seconds your choose color it will start. For link fixtures follow App #. 1.

Make own custom color and display: Press menu, slnd- Press enter choose Nast- enter, press

up button, find nanu put the value 1-255 on RGBAW each color and press up/down button

find- shnd press enter- choose colo press enter and choose Co11 and press enter, after some

second light it will start to project custom made color as per value of color you put.