AOMWAY Nexus V2 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Transmissor AOMWAY Nexus V2. AOMWAY Nexus V2 9 páginas. Full hd digital link

AOMWAY

1. Product Introduction

Nexus V2 is equipped with high performance decoding chip and can do

the most advanced low latency algorithm for HD video transmission. The

whole system latency is estimated to be 70ms and reach up to 7km

transmission distance, also adapt to multiple antennas for different

application purposes. This digital link device enables real time aerial

photography in full HD resolution.

5.8GHz high frequency comes with better anti-interference feature and

guarantees high image quality. Dual signal output can do auto switch, one

for 1080p micro HD camera and the other for HDin. It also has wide working

voltage range 7-26V for different power supplies. The kit perfectly supports

MAVLink protocol, can do overlapping display and set up for the OSD data

at receiver, support both HD video recording in transmitter and receiver.

> Resolution： Full HD input:1080p 60fps（downward compatibility）

> Auto switch frequency or manual frequency setup

> Minimum transmission latency down to 30ms

> HD camera with HD type C port, and HD type A port

> Transmitter antenna connector is MMCX,

Receiver antenna connector is SMA-jack

> Fully support all MavLink protocol flight controller, and real time display

OSD data on screen, such as flight controller parameters, frequency, bit

stream, transmission RSSI and recording indicator etc.

> HD recording on both of transmitter and receiver side (MP4 format and

every 3min to save a recording file)

> Advance algorithm for H.264 compressed format, 20Mbps bit stream

and auto adjustment

> High frequency transmission at 5.8GHz for perfect image quality

> Use TF card for firmware upgrade (by manufacturer)

> Weight: Transmitter 60g;

> Working environment: 0°C- 50°C

Camera: 1080 25fps（downward compatibility）

Receiver 108g (not include the antennas)

RC Vision System