AOMWAY Nexus V2 Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Transmissor AOMWAY Nexus V2. AOMWAY Nexus V2 9 páginas. Full hd digital link
AOMWAY
4x antennas
5. Interface diagram and button functions
> Transmitter unit:
1. UART port: for connection with controller, use RX pin on transmitter to
adopt flight controller's TX.
2. TF Card : for HD recording and firmware upgrade on transmitter,
maximum support to 128GB.
3. LED1: Red light for indicating power/system working status.
4. LED2: Blue light for indicating data communication.
5. DC7-26V: power supply for transmitter, working voltage is recommended
to be 12v and use 3.5mm DC barrel connector(inner plus outer minus
type).
6. CAM: for camera connection, up to 1080P 25fps.
7. HD: HD type C connector,max support to 1080P 60fps or below.
8. BUT: press button (inactive, to be determined).
9. ANT1,ANT2: transmitter antenna port type as MMCX.
> Receiver unit(for ground base station):
4
RC Vision System