airweigh LoadMaxx 5809 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Balanças airweigh LoadMaxx 5809. airweigh LoadMaxx 5809 16 páginas. For tractors with a hydraulic lift

Imprimir página

Alarm Function

The Air-Weigh LoadMaxx Tractor Scale has two 12V-24V 1.0 amp

output alarms. To use the alarm feature, attach the gray or brown

alarm output wire stemming from the Tractor ComLink harness to

a user-supplied alarm. Wires are marked WARN 1 and WARN 2.

Route the ground wire/s for the alarm/s to the WARN GROUND

wire/s at the Tractor ComLink harness. Alarms will activate when a

programmed warning weight or alarm weight limit is reached. The

limits activating this feature are set by the user.

Warning weight output is a pulsing voltage, while alarm weight

output is continuous voltage.

You can delay the period between each overweight and the

subsequent activation of the alarm, by up to sixty seconds.

Similarly, you can delay the period between the return to not

overweight, and the alarm's deactivation, by up to sixty seconds.

These delays can prove useful in moderating alarm responses to

weight oscillations, such as those occurring during travel.

Note: Remember, to deactivate and reset an active warning or alarm

weight, simply press the ENTER button once while alarms are

active, while weights are being displayed. To turn the alarm function

completely off, go back to the TURN ON/OFF portion of the ALARMS

menu and change the (Now ON) back to a (Now OFF).