airweigh LoadMaxx 5809 Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Balanças airweigh LoadMaxx 5809. airweigh LoadMaxx 5809 16 páginas. For tractors with a hydraulic lift

Imprimir página

Creating a PIN

When the trailer scale PIN is set to 0, the operator will not need to enter

a PIN to access the PROGRAM menu functions. Setting a PIN into

the LoadMaxx Tractor Scale will eliminate tampering with that scale's

CALIBRATION, SCALE TYPE, and PIN settings. After calibration, fleets

with both tractor and trailer scales should develop a fleet PIN policy to

protect the calibration settings from tampering.

To set a PIN:

1. Select PRINT,SETUP

2. Select SYSTEM SETUP

3. Select SYS CONFIG

4. Select SET PIN #

5. Using the up/down arrows ▲ or ▼ scroll to the desired PIN, then

press ENTER. Press ESC repeatedly to return to main menu

The new PIN is now entered into the scale. To change the PIN later,

repeat these steps and change the setting. Setting the PIN to zero will

reset the scale's PIN to its original status of No PIN Needed.

Note: that once you gain PIN access by entering the PIN correctly, you

will retain that access until the scale has a power cycle.

Turning off the guided Instructions - How-To-Weigh

How-To-Weigh instructions are displayed on the tractor scale in

rotation with the actual weight screen. To turn off these instructions off:

1. Press ESC one or more times until the Main Menu appears,

with VIEW WEIGHTS blinking

2. Select PRINT,SETUP

3. Select SYSTEM SETUP

4. Select SYS CONFIG

5. Select DISPLY SETUP

6. Select SHOW / HIDE

7. Select SHOW HELP

8. Select HIDE HELP to turn off the How-To-Weigh instructions.

Press ESC repeatedly to return to the main menu