airweigh LoadMaxx 5809 Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Ваги airweigh LoadMaxx 5809. airweigh LoadMaxx 5809 16 сторінок. For tractors with a hydraulic lift
Друкувати сторінкуCreating a PIN
When the trailer scale PIN is set to 0, the operator will not need to enter
a PIN to access the PROGRAM menu functions. Setting a PIN into
the LoadMaxx Tractor Scale will eliminate tampering with that scale's
CALIBRATION, SCALE TYPE, and PIN settings. After calibration, fleets
with both tractor and trailer scales should develop a fleet PIN policy to
protect the calibration settings from tampering.
To set a PIN:
1. Select PRINT,SETUP
2. Select SYSTEM SETUP
3. Select SYS CONFIG
4. Select SET PIN #
5. Using the up/down arrows ▲ or ▼ scroll to the desired PIN, then
press ENTER. Press ESC repeatedly to return to main menu
The new PIN is now entered into the scale. To change the PIN later,
repeat these steps and change the setting. Setting the PIN to zero will
reset the scale's PIN to its original status of No PIN Needed.
Note: that once you gain PIN access by entering the PIN correctly, you
will retain that access until the scale has a power cycle.
Turning off the guided Instructions - How-To-Weigh
How-To-Weigh instructions are displayed on the tractor scale in
rotation with the actual weight screen. To turn off these instructions off:
1. Press ESC one or more times until the Main Menu appears,
with VIEW WEIGHTS blinking
2. Select PRINT,SETUP
3. Select SYSTEM SETUP
4. Select SYS CONFIG
5. Select DISPLY SETUP
6. Select SHOW / HIDE
7. Select SHOW HELP
8. Select HIDE HELP to turn off the How-To-Weigh instructions.
Press ESC repeatedly to return to the main menu
9