DUO-FAST DF175-CN Manual de instruções e esquema - Página 7

Procurar online ou descarregar pdf Manual de instruções e esquema para Pistola de pregos DUO-FAST DF175-CN. DUO-FAST DF175-CN 12 páginas. Cap nailer

MAINTENANCE

Your tool requires lubrication every day you use it.

Disconnect the air supply from the tool before lubricating.

Turn the tool so the inlet is facing up and put 6-8 drops of pneumatic

oil, part number 403720, into the air inlet. (See Fig 2).

Never use detergent oil or additives. Operate the tool briefly after

adding oil.

Wipe off excessive oil at the exhaust. Excessive oil will damage O-

rings of tool. If in-line oiler is used, manual lubrication through the air

inlet is not required on a daily basis.

CLEANING THE TOOL

NEVER USE GASOLINE OR OTHER FLAMMABLE LIQUIDS TO

CLEAN THE TOOL. VAPORS IN THE TOOL MAY IGNITE BY A

SPARK AND CAUSE THE TOOL TO EXPLODE AND RESULT IN

DEATH OR SERIOUS PERSONAL INJURY.

SOLVENTS USED TO CLEAN THE NOSE OF THE TOOL AND CON-

TACT SAFETY TRIP MECHANISM MAY SOFTEN THE TAR ON THE

SHINGLES AND CAUSE THE BUILDUP TO BE ACCELERATED.

MAKE SURE TO DRY THE TOOL THOURGHLY AFTER CLEANING

AND BEFORE OPERATIONG THE TOOL AGAIN.

1. Disconnect the air supply from the tool.

2. Remove tar buildup with kerosene, #2 fuel oil or diesel fuel. Do not allow

solvent to get into the cylinder or damage may occur. Dry off tool completely

DUO-FAST

before use.

(5)