DUO-FAST DF175-CN Manual de instruções e esquema - Página 8
Procurar online ou descarregar pdf Manual de instruções e esquema para Pistola de pregos DUO-FAST DF175-CN. DUO-FAST DF175-CN 12 páginas. Cap nailer
Imprimir páginaSTOP USING THE TOOL IMMEDIATELY IF ANY OF THE FOLLOWING
PROBLEMS OCCUR. SERIOUS PERSONAL INJURY COULD OCCUR.
ANY REPAIRS OR REPLACEMENTS MUST BE DONE BY A QUALIFIED
PERSON OR AN AUTHORIZED SERVICE CENTER ONLY.
SYMPTOM
Air leaking at trigger valve
area
Air leaking between housing
and nose.
Air leaking between housing
and cap assembly.
Tool skips driving fastener.
TROUBLESHOOTING
WARNING
POSSIBLE PROBLEMS
O-rings in trigger valve
housing are damaged.
Loose screws in housing.
Damaged O-rings.
Damage to bumper.
Loose screws.
Damaged gasket.
Worn bumper.
Dirt in nose.
Dirt or damage prevents
fasteners or fastener feed pawl
from moving freely in
magazine.
Damaged feed pawl spring.
Inadequate air flow to tool.
Worn O-ring on piston or lack
of lubrication.
Damaged O-rings on trigger
valve.
Air leaks.
Cap gasket leaking.
(6)
SERVICE
O-rings must be replaced &
operation of contact safety trip
mechanism must be checked.
Screws need to be tightened.
O-rings need to be replaced.
Bumper needs to be replaced.
Screws need to be tightened.
Gasket needs to be replaced.
Bumper needs to be replaced.
Clean.
Magazine needs to be cleaned.
Spring needs to be replaced.
Fitting hose or air compressor
needs to be checked.
O-ring needs to be replaced.
Lubricated.
O-rings need to be replaced.
Screws and fittings need to be
tightened.
Gasket needs to be replaced.