Free The Tone MC-3 Manual do Proprietário - Página 9

Procurar online ou descarregar pdf Manual do Proprietário para Equipamento de gravação Free The Tone MC-3. Free The Tone MC-3 10 páginas.

By combining the MC-3 with a Free The Tone product, the convenience of the whole system is

increased and you can use them in various practical ways.

8-1. Turning ARC-3's LOOP1 On/Off from MC-3's SW1

Let's assume that the control change number is 001 and the MIDI channel is 1.

1) In the MIDI setup menu's Item 1 "MIDI Rx MIDI receive channel setting" on the ARC-3 in Edit mode,

set the MIDI channel to 1.

2) In the MIDI setup menu's Item 6 "control change number setting" on the ARC-3 in Edit mode, set the

LOOP1 [ l1 ]'s control change number to 001.

3) With the Item 1 "mode setting" of the MC-3 in Edit mode, select Mode-2.

4) With the Item 3 "footswitch setting" of the MC-3 in Edit mode, set SW1 to control change number:

001, MIDI channel: CH1, operation type: LATCH.

This completes the setup. Connect a MIDI cable between the MC-3's MIDI OUT and the ARC-3's MIDI

IN.

By pressing SW1 on the MC-3, the MIDI signal is sent and the ARC-3's LOOP1 is turned on/off. When

the LED above SW1 is illuminated, LOOP1 is turned on and when the LED is off, LOOP1 is turned off.

Let's assume that the control change number is 002 and the MIDI channel is 1.

1) In the MIDI setup menu's Item 1 "MIDI Rx MIDI receive channel setting" on the ARC-53M in Edit mode,

set the MIDI channel to 1.

E X AMPLES

2) In the MIDI setup menu's Item 4 "control change number setting" on the ARC-53M in Edit mode, set

the MUTE [ mt]'s control change number to 002.

3) With the Item 1 "mode setting" of the MC-3 in Edit mode, select Mode-2.

4) With the Item 3 "footswitch setting" of the MC-3 in Edit mode, set SW2 to control change number:

002, MIDI channel: CH1, operation type: LATCH.

This completes the setup. Connect a MIDI cable between the MC-3's MIDI OUT and the ARC-53M's

MIDI IN.

By pressing SW2 on the MC-3, the MIDI signal is sent and the MUTE on the ARC-53M is turned on/off.

When the LED above SW2 is illuminated, the MUTE is turned on and when the LED is off, the MUTE is

turned off.

Let's assume that the control change number is 62 and the MIDI channel is 1.

The control change number 62 is used for the FLIGHT TIME's TAP tempo entry.

1) Set the FLIGHT TIME's MIDI receive channel to channel 1.

2) With the Item 1 "mode setting" of the MC-3 in Edit mode, select Mode-2.

3) With the Item 3 "footswitch setting" of the MC-3 in Edit mode, set SW3 to control change number:

062, MIDI channel: CH1, operation type: MOMENTARY.

This completes the setup. Connect a MIDI cable from the MC-3's MIDI OUT to the FLIGHT TIME. When

you enter the tempo by stomping on the MC-3's SW3, the FLIGHT TIME's BPM or delay time will be

changed according to the tap-entered tempo.