AudioControl ACX-3.2 Manual do Proprietário - Página 10
Procurar online ou descarregar pdf Manual do Proprietário para Stereo Equalizer AudioControl ACX-3.2. AudioControl ACX-3.2 20 páginas. All-weather equalizer & crossover with paging mic
Imprimir páginaInstalling the ACX-3.2 (continued)
Power Wiring
Disconnect the negative terminal of your car's battery before
working on any electrical connections. Failure to do so could lead to
a dramatic spark in your life.
Remote Turn-On – Connect a 22 to 18 gauge wire from a head-unit's remote
turn-on or from a switched 12 volt source to the "Remote" connector on
the ACX-3.2.
Positive (+12 V) Connection – Insert an 18 to 16 gauge wire into the
connector labeled "Power" on the nifty connector of your ACX-3.2.
Connect it to a good, constant fused source of 12 volts (we suggest the
battery).
Power Connector
Ground Connection – Use the same gauge wire as you did for the positive
connector and run it from the "Ground" connector on the ACX-3.2 to
the negative terminal of the battery, a ground buss, or a verified ground
location. The factory head unit ground is not recommended.
Illumination – The connector labeled "Illumination" on your ACX-3.2 provides
power to the back-lighting of your unit. Connecting it to a switched 12
volt source, such as the "Remote" will light up the back-lighting of your
ACX-3.2. A really cool idea is to connect the illumination wire to a factory
dash light dimmer and have the ability to dim the back-lighting of the
ACX-3.2 with your dash lights.
10
Owner's Enjoyment Manual