AudioControl ACX-3.2 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Стерео еквалайзер AudioControl ACX-3.2. AudioControl ACX-3.2 20 сторінок. All-weather equalizer & crossover with paging mic

Друкувати сторінку

Installing the ACX-3.2 (continued)

Power Wiring

Disconnect the negative terminal of your car's battery before

working on any electrical connections. Failure to do so could lead to

a dramatic spark in your life.

Remote Turn-On – Connect a 22 to 18 gauge wire from a head-unit's remote

turn-on or from a switched 12 volt source to the "Remote" connector on

the ACX-3.2.

Positive (+12 V) Connection – Insert an 18 to 16 gauge wire into the

connector labeled "Power" on the nifty connector of your ACX-3.2.

Connect it to a good, constant fused source of 12 volts (we suggest the

battery).

Power Connector

Ground Connection – Use the same gauge wire as you did for the positive

connector and run it from the "Ground" connector on the ACX-3.2 to

the negative terminal of the battery, a ground buss, or a verified ground

location. The factory head unit ground is not recommended.

Illumination – The connector labeled "Illumination" on your ACX-3.2 provides

power to the back-lighting of your unit. Connecting it to a switched 12

volt source, such as the "Remote" will light up the back-lighting of your

ACX-3.2. A really cool idea is to connect the illumination wire to a factory

dash light dimmer and have the ability to dim the back-lighting of the

ACX-3.2 with your dash lights.

Owner's Enjoyment Manual