AudioControl LC6 Manual do Proprietário - Página 2
Procurar online ou descarregar pdf Manual do Proprietário para Conversor de multimédia AudioControl LC6. AudioControl LC6 16 páginas. Six channel line output converter
Imprimir páginaFeatures and Highlights
Speaker-Level Inputs
If you are like many people who like the look and features of their
factory-installed source unit but feel it's lacking power and bass, we have
good news. The LC6 has high-impedance speaker-level inputs that allow
it to accept amplified signals from most factory-installed source units
(even Bose) and output a high-quality pre-amp signal via standard RCA
connectors. This will allow you to add better-quality amplifiers, proces-
sors and speakers while keeping the convenience features of your
factory-installed source unit. Unlike "inexpensive" speaker-level and
line-output converters available, the LC6 offers high sound quality and
can handle the full signal strength of a 400-watt amplifier.
Signal-Sensing Inputs
Most engineers of factory-installed source units lack the common
decency to include features that make it easy to upgrade with really
good-sounding, performance after-market products. One of those key
features is a 12-volt trigger that will turn on devices like the LC6 and
your external amplifiers. Therefore, we have equipped your LC6 with
signal sensing inputs, which means once it detects a speaker-level signal
at its inputs, it will power up. When you turn off the your source unit
and the speaker-level signal goes away your LC6 will automatically turn
off after a few minutes. This turn-off delay is in case you are changing
CD's or your radio station is quiet for a few moments and you then you
don't really want your system to turn off. Optionally, your LC6 is also
equipped with a standard 12-volt trigger (Remote In) that will allow you
to turn on your LC6 in the traditional manner.
12-Volt Trigger Output
Since you will be using an external amplifier and processor in your
system, you will need the ability to "trigger" or turn-on these devices (a
romantic dinner won't quite work here). Your LC6 has a 12-volt output
trigger (labeled "Remote Out") that will provide a 12-volt output to
trigger these remote devices, when the LC6 is powered up. Please note
that this output is not to be used as power for these devices.
AutoMode Inputs
Sometimes in life (and car audio) we need more outputs than inputs.
Therefore we have equipped your LC6 with AutoMode inputs that take
the rear-channel signal and automatically feed it to the subwoofers, when
there is no signal present on the subwoofer inputs. This means your LC6
will accept two input channels and give you four output channels. Or it
can accept four input channels and give you six output channels. (See
Figure Six.)
page 2