AudioEngine D2 Manual de configuração - Página 6

Procurar online ou descarregar pdf Manual de configuração para Conversor de multimédia AudioEngine D2. AudioEngine D2 8 páginas. Premium 24-bit wireless dac
Também para AudioEngine D2: Característica (3 páginas)

Imprimir página

Pairing

Pairing is the function by which two devices become acquainted. Once

a Sender and Receiver(s) are paired, they will remember one another.

Note: D2 Senders and Receivers packaged together are paired out

of the box, so if you're only using one Sender/Receiver set, no further

configuration is needed.

To pair an additional Receiver or to re-pair a Sender/Receiver set, press

the Pair button on the Receiver (the Pair LED will blink), then press the

Pair button on the Sender. Both Sender and Receiver pair lights should

now be solid, indicating that they are paired.

Troubleshooting

• I have connected my D2 Sender and Receiver as shown, but there is

no music output.

1. Check to see that the Power and Pair lights are lit and solid. If

not, try another USB port on your computer.

2. If the Pair light is blinking re-pair the Sender and Receiver as

discussed in the Pairing section.

3. Verify that "Audioengine D2" is selected as your output device

under Control Panel (PC) or System Preferences/Audio (Mac).

4. Try another USB cable.

5. Verify that the proper input source is selected on your audio

system.

• I have connected my D2 to my TV/DVD/BluRay, but there is no sound

output.

1. Verify that the D2 Sender and Receiver are both connected to a

power adapter and that the power lights are lit.

2. Be sure that your source digital audio is set to "PCM Stereo".

D2 setup guide

• Only one channel plays through my D2.

1. Check the RCA cables between your D2 and your sound system.

2. Check your audio player to ensure that the balance is centered.

Break-In Period

Your DAC will sound great out of the box and will get better over time.

However, give it 40 to 50 hours break-in time before doing any critical

listening.

Specifications

Electrical

Full Scale Output

Frequency Response

S/N Ratio (DC to 20 kHz)

THD+N (1 kHz FS 96 kS/s)

Interface

Input Data Rate

Input Bit Depth

USB

Wireless Range (typical)

Power Requirements

Sender

Receiver

For additional specifications and product information go to:

audioengineusa.com

2.0V RMS

10 Hz - 30 kHz, +/- 0.5db

>115 dB

<0.0015%

up to 192KS/s

up to 24 bits

type 1.1 or above

>100 ft

270ma

300ma