AudioEngine D2 Руководство по настройке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по настройке для Медиаконвертер AudioEngine D2. AudioEngine D2 8 страниц. Premium 24-bit wireless dac
Также для AudioEngine D2: Характеристика (3 страниц)
Pairing
Pairing is the function by which two devices become acquainted. Once
a Sender and Receiver(s) are paired, they will remember one another.
Note: D2 Senders and Receivers packaged together are paired out
of the box, so if you're only using one Sender/Receiver set, no further
configuration is needed.
To pair an additional Receiver or to re-pair a Sender/Receiver set, press
the Pair button on the Receiver (the Pair LED will blink), then press the
Pair button on the Sender. Both Sender and Receiver pair lights should
now be solid, indicating that they are paired.
Troubleshooting
• I have connected my D2 Sender and Receiver as shown, but there is
no music output.
1. Check to see that the Power and Pair lights are lit and solid. If
not, try another USB port on your computer.
2. If the Pair light is blinking re-pair the Sender and Receiver as
discussed in the Pairing section.
3. Verify that "Audioengine D2" is selected as your output device
under Control Panel (PC) or System Preferences/Audio (Mac).
4. Try another USB cable.
5. Verify that the proper input source is selected on your audio
system.
• I have connected my D2 to my TV/DVD/BluRay, but there is no sound
output.
1. Verify that the D2 Sender and Receiver are both connected to a
power adapter and that the power lights are lit.
2. Be sure that your source digital audio is set to "PCM Stereo".
8
D2 setup guide
• Only one channel plays through my D2.
1. Check the RCA cables between your D2 and your sound system.
2. Check your audio player to ensure that the balance is centered.
Break-In Period
Your DAC will sound great out of the box and will get better over time.
However, give it 40 to 50 hours break-in time before doing any critical
listening.
Specifications
Electrical
Full Scale Output
Frequency Response
S/N Ratio (DC to 20 kHz)
THD+N (1 kHz FS 96 kS/s)
Interface
Input Data Rate
Input Bit Depth
USB
Wireless Range (typical)
Power Requirements
Sender
Receiver
For additional specifications and product information go to:
audioengineusa.com
2.0V RMS
10 Hz - 30 kHz, +/- 0.5db
>115 dB
<0.0015%
up to 192KS/s
up to 24 bits
type 1.1 or above
>100 ft
270ma
300ma
9