3xLogic VISIX VX-VSS-20 Manual de início rápido - Página 9
Procurar online ou descarregar pdf Manual de início rápido para Câmara de segurança 3xLogic VISIX VX-VSS-20. 3xLogic VISIX VX-VSS-20 14 páginas. Stereoscopic people counting camera
Imprimir página
4 Identifying and Configuring Camera
4.1
Identifying the Camera on Local Network
Using the 3xLOGIC Camera (VISIX-IP) Setup Utility is recommended for any network environment as it will find all
VISIX cameras across multiple subnet masks, utilizing mDNS search discovery. Camera information such as IP
Address, Subnet Mask and Gateway Settings will be displayed and can be edited from this utility. To search for a
device, launch the utility. Download the utility
Note: VSXIP Utility v10.10.0025 or newer is required for detection of the VX-VTOF-1.
Steps:
1.
Click on Detect Online Devices/ Change IP Address to proceed to the Online Devices window.
Figure 4-1 : 3xLOGIC Camera Setup Utility - Detecting Online Devices
After clicking Detect Online Devices/ Change IP Address on the main page you will be taken to the Online Devices
window. A list of all VISIX devices discovered on your network will be visible.
2.
To select a device, click on the desired device in the generated menu under the Select Online Devices
area.
3.
To change an IP address for a selected VISIX camera in the Detect Online Devices window, select the
desired camera, click on the Change IP Address button. The fields under the Configure IP Address area
will un-grey to allow for manual editing of camera IP addresses as well as other settings.
Figure 4-2 3xLOGIC Camera Setup Utility - Identifying Device IP Address
4.
When you have finished editing the settings, click Save IP Address to save new changes.
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20
here
or contact your 3xLOGIC representative for the latest version.
9