3xLogic VISIX VX-VSS-20 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} 3xLogic VISIX VX-VSS-20에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3xLogic VISIX VX-VSS-20 14 페이지. Stereoscopic people counting camera

4 Identifying and Configuring Camera

4.1

Using the 3xLOGIC Camera (VISIX-IP) Setup Utility is recommended for any network environment as it will find all

VISIX cameras across multiple subnet masks, utilizing mDNS search discovery. Camera information such as IP

Address, Subnet Mask and Gateway Settings will be displayed and can be edited from this utility. To search for a

device, launch the utility. Download the utility

Note: VSXIP Utility v10.10.0025 or newer is required for detection of the VX-VTOF-1.

Steps:

Click on Detect Online Devices/ Change IP Address to proceed to the Online Devices window.

Figure 4-1 : 3xLOGIC Camera Setup Utility - Detecting Online Devices

After clicking Detect Online Devices/ Change IP Address on the main page you will be taken to the Online Devices

window. A list of all VISIX devices discovered on your network will be visible.

To select a device, click on the desired device in the generated menu under the Select Online Devices

area.

To change an IP address for a selected VISIX camera in the Detect Online Devices window, select the

desired camera, click on the Change IP Address button. The fields under the Configure IP Address area

will un-grey to allow for manual editing of camera IP addresses as well as other settings.

Figure 4-2 3xLOGIC Camera Setup Utility - Identifying Device IP Address

When you have finished editing the settings, click Save IP Address to save new changes.

12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC

VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20

here

or contact your 3xLOGIC representative for the latest version.