aevit 2.0 Manual de instalação - Página 13

Procurar online ou descarregar pdf Manual de instalação para Suporte para TV aevit 2.0. aevit 2.0 17 páginas. Mounting brackets

Imprimir página
prIMArY INpUT
2.5 OThEr MOUNTINg OpTIONS
(CONTINUEd)
ATTAChINg ONLY ThE INpUT dEVICE SwIVEL BrACkET (CONTINUEd)
sTEP 5
Mount the Input Device horizontal Swivel Bracket
to the quick Adjust Upper Pole using (1) 3/8" x 2.5"
Grade 8 Bolt, (1) 2" Dia. Rubber Washer, (1) 3/8" Flat
Washer, and (1) 3/8" Lock Nut. The 3/8" bolt, 3/8" flat
washer and 3/8" lock nut will need to be supplied by
the installer while the 2" Dia rubber washer and Input
Device Swivel Bracket are from the disassembled In-
put Device Articulating Swivel Bracket (Step 1, Page
2-9)
sTEP 6
Tighten the 3/8" Lock Nut such that there is NO
MOVEMENT dUrINg NOrMAL OpErATION OF
ThE INpUT dEVICE.
WARNING:
FAILURE TO TIGhTEN ThE 3/8" LOCK NUT COM-
PLETELy COULD CAUSE AN ACCIDENT RESULT-
ING IN SERIOUS INjURy AND/OR DEATh.
sTEP 7
The Input Device horizontal Swivel Bracket, as the
name implies, swivels in 45
multiple angles of the Input Devices (Figure 28).
To install the Input Device, simply place the ball of
the Input Device into the socket of the Input Device
horizontal Swivel Bracket and tighten using the "T"
handle as shown in Figure 29. The completed install
should resemble Figure 30.
increments to allow for
O
(BrkT-AEVIT-FLr & BrkT-AEVIT dOOr)
INPuT DEvIcE hORIZONTAl
SwIvEL BRACkET
QuIck ADjusT uPPER POlE
3/8" FLAT wASHER
3/8" lOck NuT
45
O
"T" hANDlE
FIGuRE 28
FIGuRE 30
AEVIT 2.0 MOUNTING BRACKETS INSTALL MANUAL
3/8" x 2.5" GRADE 8 bolt
2" DIA. RubbER WAshER
(FLAT SIDE DOwN
AGAINsT ThE QuIck
ADjusT uPPER POlE)
3/8" ThRu hOlE
FIGuRE 27
INPuT DEvIcE
"T" hANDlE
FIGuRE 29: INPuT DEvIcE
MOuNTING
2-10