Constellation Pictor Manual do Proprietário - Página 13
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Constellation Pictor. Constellation Pictor 17 páginas. Line stage preamplifier
Imprimir páginaInput setup
When you press the multifunction button labeled Setup on the input screen, this
screen will appear. It allows you to set up a home theater bypass input, and set
minimum and maximum output levels.
To set minimum and/or maximum levels: Adjust the Pictor's volume to the
desired minimum or maximum level, and press either the Set Min or Set Max
button, depending on which function you want, and hit Apply to accept the
setting. To clear the setting, press either CLR Min or CLR Max as appropriate, or press Default to clear both
settings.
To set up a home theater bypass input: First select the input you want to use for this function, then adjust the
volume on the Pictor to the desired level. Push the Set Min button, then the Set Max button, then the Apply
button. To clear these settings, press CLR Min then CLR Max, or press Default.
Screen setup
To adjust LCD brightness: Press the + and – buttons on the left side of the screen,
on either side of the dark dot.
To adjust LCD contrast: Press the + and – buttons on the right side of the screen,
on either side of the half-dark/half-light dot.
To adjust LCD backlight timeout: Press the Timeout button in the lower left
corner to keep the screen lit for 15 sec., 30 sec., 1 min., 5 min., 10 min., and
always on.
To accept or cancel screen setting changes: Press the Apply or Cancel button, respectively.
To return to the factory default settings: Press the Default button. This will bring up a screen asking "Are you
sure you want to set this device to its default settings?" Hit the Yes button to go to default settings, the No
button to cancel.
Product info
This screen is accessed using the multifunction button labeled Info on the screen
setup screen. It is for servicing use only.
13