Cassida 6600 Manual de início rápido - Página 3

Procurar online ou descarregar pdf Manual de início rápido para Balcão de caixa Cassida 6600. Cassida 6600 3 páginas. Feed gap procedure
Também para Cassida 6600: Procedimento de limpeza (3 páginas)

Imprimir página

4. Gently tug on the end of each bill. There should be moderate resistance.

IMPORTANT: The left and right bills sho, uld have equal resistance.

Technical Services for further troubleshooting. Be sure to provide the following information:

a. If the bills feel too loose, tighten the feed gap by turning the adjustment screws counterclockwise with

Phillips screwdriver.

b. If the resistance feels too tight, loosen the gap by turning the screws clockwise with Phillipʼs screwdriver.

c. Adjust 1/8 turn at a time, then reconnect the power cord and turn the unit on. Retest the unit to see if it works

fine or it needs more feed gap adjustment.

Feeding gap

adjusting screw. (left)

Feeding gap

adjusting screw. (right)

NOTE:

Several factors can cause a Cassida 6600 to jam or not recognize

genuine bills:

- Overly wrinkled, overly creased, overly worn, and vandalized bills

- Foreign objects dropped or run through the bill path

- Dropping the unit or bumping into the unit during use

- A harsh change in temperature

- Extended period of non-use

- Improper maintenance or lack of preventative maintenance/cleaning

Cassida Corporation • 11035 Technology Place, Suite 500 San Diego, CA 92127 • www.CassidaUSA.com

Feed Gap Procedure

CONTACT INFORMATION

Cassida Corporation

After Market Technical Services

Support: http://www.cassidausa.com/support

E-Mail: [email protected]

6600

Bills feel tight, loosen

feed gap (clockwise)

Bills feel loose, tighten

feed gap (counterclockwise)

REV0919