DAPAudio X-18BA Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Altifalantes DAPAudio X-18BA. DAPAudio X-18BA 14 páginas.

Controlpanel

Volume

Use to adjust the input volume level for the X-18BA.

2) Limiter LED

We suggest you to set the input level with the Volume (1) control in such way that the LED blinks

occasionally yellow. If the LED blinks red or lights red continuously we strongly suggest you to lower the

Volume (1) control.

3) Loudness Button

The loudness circuit amplifies certain frequencies in order to get a more full sound at low volumes.

Low frequency

Use this control set the optimal crossover frequency for the speaker (system) connected to the high

output.

5) Phase switch

Use this switch to reverse the phase of the subwoofer if necessary.

6) XLR Input

The input equipped with 3 pole XLR/ jack combo socket is electronically balanced to accept the

(line) signal from any mixing console.

7) Full range XLR Output

For linking several X-18BA speakers.

Ground Lift Switch

When this button is pressed, it separates the signal ground from the chassis ground, enabling you to

eliminate potential ground loops or low-frequency hum.

9) High XLR Output

For connection of an optional active full range or satellite speaker system.

Fig. 2