Aplisens MS-100 Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição Aplisens MS-100. Aplisens MS-100 8 páginas. Industrial pressure gauges (manometers); pressure gauges with diaphragm seals
Imprimir páginaIO.MS-100.01(EN)
Marking used
Symbol
Warning to proceed strictly in accordance with the information contained in the
documentation in order to ensure the safety and full functionality of the device.
i
Information particularly useful during installation and operation of the device..
Information concerning dealing with used equipment.
BASIC REQUIREMENTS AND SAFETY IN USE
- The manufacturer will not be liable for damage resulting from incorrect installation,
failure to maintain the device in a suitable technical condition, or use of the device
other than for its intended purpose.
- The installation should be executed by qualified staff with the authorization necessary for
installing devices for pressure measurement.
- The installer is responsible for executing the installation in compliance with this instruction
manual and standards concerning safety for the type of installation executed.
- In installations with manometers, in case of leakage, there exists a hazard to personnel due
to pressurized installations. All safety and protection measures must be observed during
installation, maintenance, usage and inspections.
- In case of failure the device should be disconnected and returned to the manufacturer, or his
authorized representative for repair.
The manufacturer reserves the right to make changes (not having a negative impact on the
operational and metrological parameters of the products) without updating the contents of the
technical manual.
www.aplisens.pl.
description