Aplisens PM-22 Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Transdutor Aplisens PM-22. Aplisens PM-22 5 páginas. Intersystem pressure transducer

Imprimir página
Symbols used
Symbol
Warning to proceed strictly in accordance with the information contained in
the documentation in order to ensure the safety and full functionality of the device.
i
Information particularly useful during installation and operation of the device.
Information on disposal of used equipment.
BASIC REQUIREMENTS AND SAFE USE
- The manufacturer will not be liable for damage resulting from incorrect installation, failure
to maintain the device in a suitable technical condition, or use of the device other than for
its intended purpose.
- Installation should be carried out by qualified staff having the required authorizations to install
electrical and pressure-measuring devices. The installer is responsible for performing
the installation in accordance with these instructions and with the electromagnetic compatibility and
safety regulations and standards applicable to the type of installation.
- In systems with pressure transmitters there exists, in case of leakage, a danger to staff on the side
where the medium is under pressure. All safety and protection requirements must be observed
during installation, operation and inspections.
- If a device is not functioning correctly, disconnect it and send it for repair to the manufacturer or
o a firm authorized by the manufacturer.
In order to minimize the risk of malfunction and associated risks to staff, the device is not to be
installed or used in particularly unfavourable conditions, where the following dangers occur:
- Possibility of mechanical impacts, excessive shocks and vibration;
- Excessive temperature fluctuation, exposure to direct sunlight;
- Condensation of water vapour, dust, icing.
Changes in the production of the device may precede a paper updating for the user - the current user
manuals are available at
www.aplisens.pl
Description