Durr XR25 Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Conversor de multimédia Durr XR25. Durr XR25 14 páginas. Film processor

5.5 Cleaning the tanks

• With the appropriate wet sponge, wipe both

Tanks (13)(Developer-black, Fixer-red).

• Screw in red and black plugs (29), see fig.8.

• Fill both tanks up to the mark (14) with warm

water (approx.40°C).

• Insert Developer/Fixer roller set, close latches

and catches (24), see right fold-in page.

Never let Processor run when dry.

If there are no chemicals or water in the

tanks and the mains switch is activated,

this can lead to a technical defect.

If the Developer/Fixer roller set is not

inserted, the water will spurt upwards

as the conduit for the solution is not in

place.

• Replace lid (7) again, see fig.2.

• Insert mains plug.

• Mains switch (G) ON, see p. 5.

• Film transport switch (A) ON, let XR25 run for

approx. 10 mins. The remaining chemicals

are removed from the hoses and circulation

pump.

• Mains switch (G) OFF

• Pull out mains plug.

• Remove lid (7).

• Take out developer/fixer roller set (27), see

fig.5.

• Unscrew red and black plugs (29). The water

will flow into the empty collection vessels (3).

• Empty vessels (3) again.