Cayin CS-55A Manual do utilizador - Página 17

Procurar online ou descarregar pdf Manual do utilizador para Amplificador Cayin CS-55A. Cayin CS-55A 19 páginas. Vacuum tube integrated amplifier

Turning On

Before turning on the amplifier please make sure all connections are right and power supply is stable.

• Turn on the amplifier, the power indicator will be on and the working indicator will keep flickering.

• The working indicator will be on after 30 seconds. It means that the amplifier is working normally. If the

working indicator is off, please turn off the power and contact with our local agent or our company.

• Select the right audio source channel, adjust the volume to a certain position and then you can enjoy the

music you prefer.

S m a l l T i p s

Read the Manual —— Please read the user's manual carefully before installation and operation.

Keep the Manual —— Please keep the manual for future reference.

Warning Signs —— Don't tear off or rub off the serial number.

Operation —— Do the operations as you are instructed in the Manual.

Parts —— If you are going to use parts not supplied by our company like power cord, fuses etc please make

sure that parts you used are compatible with the safety requirements. Or it will cause fire or electric

shock.

Placement —— Put the amplifier on a level place. Make sure that it doesn't bring damage to the children,

adults and the amplifier itself.

Power —— Please make sure the local voltage is the same level as indicated on the rear panel.

Overload —— If the power socket is overloaded with other equipment, it will cause fire or electric shock.

Warranty Service —— Do not open the product and change the components inside yourself. Opening the

Troubleshooting —— If any problems when you are using the product, please check according to following

cover may expose you to dangerous voltage or other hazards. The warranty doesn't

extend to any product that has been opened by you without permission of our

company.

tips to look for the exact reason. Please contact with our company if you can't solve

the problem.

NOTE:

1. When the audio system is under working state, don't

unplug the signal cable or speaker cables, or it will

cause damage to the amplifier and other equipments.

2. It should at least takes 2 minutes before you turn on the

power again, or it will cause damage to the vacuum

tubes.