Cayin CS-55A Manual do utilizador - Página 18

Procurar online ou descarregar pdf Manual do utilizador para Amplificador Cayin CS-55A. Cayin CS-55A 19 páginas. Vacuum tube integrated amplifier

Imprimir página

Troubleshooting

Please follow the instruction in the manual in order to keep the amplifier work in its best state. If wrongly

operated and you thought that would be troubles please check according to following tips to look for the exact

reasons.

Problem

Power Indicator is

OFF.

Power Indicator is

ON.

Sound Distortion

Noise output

Sound field Positioning

is not so good.

Malfunction of Remote

Control

Can't lock the USB signal

Computer can't recognize

the device

The sound is abnormal

when the input status is USB

NOTE:

is the registered trademark of Zhuhai Spark Electronic Equipment Co., Ltd.

Cause

Power cord is not well-connected.

Main fuse is out.

Troubles of inner parts or components.

Volume is at ZERO.

NO signal input.

High input signal level.

Ground of input signal cable is open

or bad contact of the input signal cable.

Components or circuits are in trouble.

Signal input cables or speaker

cables are wrongly connected.

Be disturbed.

Low Battery.

Obstacles between the amplifier and

remote.

USB cable is not well connected.

USB Audio Device has not been set.

No USB data

The USB line is not according to the

USB2.0 specification

USB driver has not been installed

USB driver error

USB socket error

Computer is too busy

The hardware resource of computer is

too low

Remedy

Check power cable connection or

power outlet connection

Replace with the same type

and value fuse.

Please contact with local

agents or our company.

Turn up the Volume.

Check the function of the

sound source.

Check the input selection and

switch to the proper input.

Turn down the volume to

suitable position.

Replace the input signal

cable with a new one.

Please contact with local

agents or our company.

Reconnect it as suggested in

the manual.

Keep away from the source of

disturbance. Turn off and restore.

Replace with new batteries.

Remove the obstacles.

Connect the USB cable well

Set USB Audio Device

Keep the Media Player in working

state

Replace the USB line

Install the USB driver

Restart the computer

Choose another USB socket

Reduce the running application

program

Upgrade the computer if

necessary