Elsner KNX PS640-IP Instalação e ajuste - Página 15

Procurar online ou descarregar pdf Instalação e ajuste para Fonte de alimentação Elsner KNX PS640-IP. Elsner KNX PS640-IP 20 páginas. Power supply system with ethernet interface

Imprimir página

IP subnet

Byte 1 / 2 / 3 / 4

Enter the subnet mask here. The device uses the values entered in this mask to

determine whether there is a communications partner in the local network. If there is

no partner in the local network, the device will not send the telegrams directly to the

partner but to the gateway that routes the telegram.

IP gateway address

Byte 1 / 2 / 3 / 4

Enter the IP address of the gateway here.

Note: If the KNX PS640-IP will only be used in the local LAN, the entry of 0.0.0.0 can

remain unchanged.

Example of assigning IP addresses

A PC is to be used to access the KNX PS640-IP.

IP address of the PC:

Subnet of the PC:

The KNX PS640-IP is located in the same local LAN, i. e. it uses the same subnet. The

subnet constrains the IP addresses that can be assigned. In this example, the IP address

of the KNX PS640-IP must be 192.168.1.xx, where xx can be a number from 1 to 254

(with the exception of 30, which is already in use). It must be ensured that no numbers

are assigned twice.

IP address of the KNX PS640-IP: 192.168.1.31

Subnet of the KNX PS640-IP:

0 ... 255

192.168.1.30

255.255.255.0