Elsner KNX PS640-IP Instalação e ajuste - Página 20

Procurar online ou descarregar pdf Instalação e ajuste para Fonte de alimentação Elsner KNX PS640-IP. Elsner KNX PS640-IP 20 páginas. Power supply system with ethernet interface

Imprimir página

To be able to access KNX, the KNX PS640-IP requires an additional physical address.

This second physical address is only used for bus access and must be set up separately:

Select the "Communication" tab under Extras -> Options in the ETS. The

communications interface is the connection that is currently configured. Click on

Settings... to open the following window:

Enter a physical address of your choice. This address should lie in the same topological

line but should not be in use by another device.

A dummy device may have to be added to the ETS project to reserve this address.