Elsner KNX PS640-IP Kurulum ve Ayarlama - Sayfa 20

Güç Kaynağı Elsner KNX PS640-IP için çevrimiçi göz atın veya pdf Kurulum ve Ayarlama indirin. Elsner KNX PS640-IP 20 sayfaları. Power supply system with ethernet interface

Sayfayı Yazdır

To be able to access KNX, the KNX PS640-IP requires an additional physical address.

This second physical address is only used for bus access and must be set up separately:

Select the "Communication" tab under Extras -> Options in the ETS. The

communications interface is the connection that is currently configured. Click on

Settings... to open the following window:

Enter a physical address of your choice. This address should lie in the same topological

line but should not be in use by another device.

A dummy device may have to be added to the ETS project to reserve this address.