Elsner KNX PS640-IP Instalação e ajuste - Página 6
Procurar online ou descarregar pdf Instalação e ajuste para Fonte de alimentação Elsner KNX PS640-IP. Elsner KNX PS640-IP 20 páginas. Power supply system with ethernet interface
Imprimir página
Technical data
Housing:
Colour:
Mounting:
Protection category:
Dimensions:
Weight:
Ambient temperature:
Ambient air humidity:
Operating voltage:
Power consumption:
Outputs:
The following standards have been considered for the evaluation of the product in
terms of electro magnetic compatibility:
Transient emissions:
·
EN 60730-1:2000 Section EMV (23, 26, H23, H26) (threshold category: B)
·
EN 50090-2-2:1996-11 + A1:2002-01 (threshold category: B)
·
EN 61000-6-3:2001 (threshold category: B)
Interference resistance:
·
EN 60730-1:2000 Section EMV (23, 26, H23, H26)
·
EN 50090-2-2:1996-11 + A1:2002-01
·
EN 61000-6-1:2004
The product has been tested for the above mentioned standards by an accredited EMV
laboratory.
6
Plastic material
White
Snap-on fitting on mounting rails
IP 20
approx. 123 x 89 x 61 (W x H x D, mm), 7 width units
approx. 395 g
Operation -5...+45 °C, Storage -25...+70°C
max. 95% R. H., avoid bedewing
230 V AC , 50 Hz
Full load: approx. 28 W
Standby: approx.. 2.7 W
• KNX bus voltage 29 V (reduced),
Output current max. 640 mA, short-circuit proof
• 24 V DC (not reduced), Output current max. 150 mA
• LAN connector RJ45; 10BaseT (10Mbit/s), Supported
internet protocols: ARP, ICMP, IGMP, UDP/IP and DHCP