CB2 FUEL Instruções de montagem - Página 3

Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior CB2 FUEL. CB2 FUEL 5 páginas. Credenza

Imprimir página
CB2 FUEL Instruções de montagem
fuel
CREDENZA
NOTE: Make sure groove of
bottom panel is assembled
towards back panel
Fit dowels of left/right side panels and partition
into corresponding holes of bottom panel. Secure
bottom panel to left/ride side panels and
partition with 6 small bolts, 6 spring washers
and 6 flat washers, using a phillips head
5
screwdriver. Do not over tighten the bolts.
A
adjustable
B
shelf
A. With the assistance of another adult, position
unit upright as shown. Insert 8 shelf supports at
desired shelf heights.
B. Place 2 adjustable shelves into assembled
7
unit. Make sure shelves are securely supported by
each shelf support.
Made in Vietnam - r06
NOTE: Do not over
tighten the bolts
bottom panel
A
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
A
foot A
foot A
A
foot B
B
A. Attach 4 feet (2A, 2B) to bottom panel with 3
large bolts per foot as shown, using a screwdriver.
B. Attach 1 support foot to bottom panel with 2
6
small bolts, 2 spring washers and 2 flat washers.
NOTE: Do not over
tighten the screws
left and right
doors
Fit 2 hinges into corresponding holes of 2 left and
right doors as shown. Secure each hinge with 2
8
small screws, using a screwdriver.
B
support
foot
foot A
foot B
hinge
Page 3 of 5