CB2 FUEL Instruções de montagem - Página 5

Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior CB2 FUEL. CB2 FUEL 5 páginas. Credenza

fuel

CREDENZA

wall mounting assembly

mounting

bracket

plastic

anchor

wall

strap

small

screw

NOTE:

If you are unsure about your wall type or what

mounting method you should use, consult a

qualified professional or your local hardware store.

For added safety and stability, it is recommended that the wall mounting hardware be installed. For

safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall,

concrete, etc.). Mount to wood studs whenever possible.

A) Attach mounting bracket to top of unit using 2 small screws.

B) Determine the final location of unit. Mark position on the wall, approximately 2" below the

mounting bracket mounted to the back of the unit.

C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly

smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is

flush with the wall.

D) Attach the mounting bracket to the wall by inserting 2 large screws through the mounting

bracket and into the wall anchor in the wall.

E) Place the unit so the mounting bracket on the back edge is allowed with the wall bracket.

F) Lace one end of the wall strap through both brackets, and into the other end of the strap.

G) Pull the strap tightly until secure.

Repeat step A-G for remaining wall mounting assembly.

Wall mounting assembly is now complete.

Made in Vietnam - r06

large

screw

mounting

bracket

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

WALL

Page 5 of 5