ADE HW 945 Series Manual de instruções - Página 6
Procurar online ou descarregar pdf Manual de instruções para Balanças ADE HW 945 Series. ADE HW 945 Series 12 páginas. Electronic table scales
Weighing
Power the scale by pressing the tilting switch underneath the base (left hand side).
For approx. 3 sec the display shows "SYS - UP" followed by a test run 0000, 1111, 2222
followed by Volt 6.0 (depending on loading status).
Finally the scale is changing into weighing mode and shows 0 on display.
Set zero
By using the Zero key eventual irregularities occurred after start up the scale can be
compensated by setting the display back to zero for all subsequent weighing procedures.
Tare Function
This function enables the user to weigh objects together with others (e.g. container, foil or
paper cloth) without the additional weight influencing the weighing result.
-
Start up the scale.
-
If necessary use the manual zero function (see above under Set zero) pressing the
Zero key if necessary. The Zero indication appears on display.
-
Place the object (e.g. container, foil or paper cloth) on the tray.
-
Press Tare key to come back to zero. Display now shows `0.00´ and the Tare symbol
will appear.
-
Put the object to be weighed on the platform.
-
The weight of object can be read from the display.
If the objects to be tared will always bet he same you may continue weighing another object
and the scale will only show the weight of the individually weighed object. In case the scale is
shut off automatically (e.g. n battery operating mode) the stored value is cleared. If the value
to be tared is changing during operation of the scale, complete unloading of the scale is
necessary. Press Tare key again to return to normal status.
Unit function
By using the Unit key you may select the weighing mode (kg, g, lb).
Before weighing always make sure you are in the selected weighing mode.
5
Use of the scale
HW945-210409-Rev006-UM-en