Dux FARUK HEADBOARD Instruções de montagem - Página 2

Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior Dux FARUK HEADBOARD. Dux FARUK HEADBOARD 3 páginas.

HARDWARE

×2 Male

bracket*

×2 Short bolt*

×1 Remote control**

×2 Female

bracket*

×2 Long bolt*

×2 Washer*

×2 Nut*

×1 Control unit**

* ×4 for queen and king size

** ×2 for queen and king size

ASSEMBLING

I. FASTEN FEMALE BRACKET-BED

Fasten female brackets to the bed.

Locate the pre-drilled holes at the head of

the bed and pull out the plastic

bolt. Bolt the female brackets through the

pre-drilled holes and place a washer

then nut on the bolt under the bed.

Make sure that the brackets are straight

up and down with the narrow

end at the bottom, then wrench tighten.

II. FASTEN MALE BRACKETS - HEADBOARD

A Make sure that the fittings are in the right

position for you bed.

For adapting >120 cm wide beds, place

the fittings in the hole market 1.

For <140 cm wide beds, move the fittings

to hole 2.

B Make sure that the brackets are

straight up and down with the narrow end

at the bottom, then wrench tighten.

dux.com

DUX, DUXIANA and DUX Pascal-systems are registered trademark owed by Dux Design AB 2012.

Printed 2021.02.01

TOOLS NEEDED

Spanner 13mm

or adjustable

wrench

(not included)

Screwdriver flat

(not included)